Description
iM3 Control Cut K-Reamer (Flex Ni-Ti) 60mm 0.15 to 0.40 Assorted Set (6 pack)
New Control Cut Flex K-Reamers are made from heat-treated Nickel Titanium for incredible flexibility when working in curved root canals, like no veterinary K-Reamer ever before.
60 mm overall length - 30 mm working length
ISO Sizes 0.15, 0.20, 0.25, 0.30, 0.35, and 0.40
Taper 0.02
One of each in an assorted pack of six.
(Also available in individual packs of six.)
Used in a clockwise turning movement, K-Reamers have less turns on the active part than K-Files.
These files are designed to exhibit an inherent flexibility that ensures optimal performance during endodontic procedures. As you employ these instruments, they undergo a controlled transformation, gradually becoming less pliable. To restore their original flexibility, a brief immersion in ice-cold water is recommended, lasting no longer than one minute. This method effectively rejuvenates their suppleness. Practitioners may consider employing this revitalization technique during the course of treatment as necessary.
Files and Reamers are intended to be single use and the cost factored in to each procedure.
iM3 Control Cut brings a universal approach to veterinary endodontics. We use the same taper across our entire endo range including hand files, rotary files, gutta percha and paper points. So whether you use a manual, rotary, or hybrid approach to your endo procedures, the iM3 Control Cut delivers precise and controlled canal shaping and perfectly fitting gutta percha for every treatment.
Sterilization
Files must be sterilized before use. ANSI/ADA Specification 28 recommends:
- Scrub the instruments with soap and warm water
- Rinse thoroughly with distilled or deionized water
- Allow to air dry
- Place instruments, unwrapped, in the autoclave tray
- Use fresh distilled or deionized water
- Steam Autoclave at 136°C (+/-2°C) for 20 minutes
- Recommended file disposal: Place used files in Biohazard Sharps container
